Cisco CCNA (200-120): The Complete Course

Understand networking and how to use routers and switches with their various configurations and connections.


    This course is over 24+ hours in length and will cover all the needed subjects to be successful in passing your CCNA 200-120 exam; also the knowledge and practice labs acquired in this course will be transferable to real world use as a Cisco professional.

    This course is complemented by my newest course: Cisco CCNA (200-120) Labs: Gateway to Success! which covers all the labs needed to further give the students the practice to prepare for configurations and simulations that will be encountered in the CCNA certification exam. We have also created a free Dropbox on my website that has all the material, labs and other resources to compliment the CCNA courses.”

    This course will give students an in-depth understanding of networking, using routers and switches and their various configurations and connections. Students will learn how to configure; default, static and dynamic routing. Students will comprehend how to manipulate each of the routing protocols attributes to meet the requirements of the network.

    This course will also prepare the student in Layer 2 technology and its various configurations, such as; VLAN’s, VTP, STP, PortFast, EtherChannel, Port-Security, Inter-VLAN communication & Trunking.

    Students will also acquire the knowledge needed to secure their routers through the use of Access-list, configuring the different types of NAT & will be able to manage the router’s components.

    Students will also be able to thoroughly grasp the concepts of both Internet Protocols; IPv4 & IPv6.

    Wide Area Network Protocols will also be covered; HDLC, PPP & Frame Relay. The student will also learn how to create redundancy in their networks through the use of Redundancy Protocols such as HSRP which is just as important. Also, within the WAN, the student will also learn how to create VPN’s and GRE Tunnels.

    This is a full comprehensive course that will take you from A-Z in your quest for the CCNA (200-120).



    Course Curriculum

    Section 1: Welcome to the most COMPLETE CCNA (200-120) Course...get ready to be amazed!
    LD11 L1-Your First Journey into the Cisco World 00:05:00
    LD11 L2-Why acquire a CCNA certification? 00:03:00
    LD11 L3-How would you get CCNA Certified? 00:04:00
    LD11 L4-Which CCNA test should I take? 00:07:00
    LD11 L5-What does the course consist of? 00:07:00
    Section 2: The Packet tracer Simulator
    LD11 L6-Navigating the Packet tracer tool 00:30:00
    LD11 L7-How to create a simple topology 00:07:00
    LD11 L8-Configuring a router 00:04:00
    LD11 L9-Configuring a switch 00:06:00
    LD11 L10-Configuring a PC 00:07:00
    LD11 L11-Configuring a server 00:06:00
    Section 3: The Basics of Networking
    LD11 L12-Understanding the Need for Networking 00:05:00
    LD11 L13-Communication at its lowest layer 00:10:00
    LD11 L14-Internetworking Devices used on a network 00:21:00
    LD11 L15-The importance of segmentation 00:11:00
    Section 4: The OSI Model
    LD11 L16-A brief history of the OSI model 00:03:00
    LD11 L17-The layers of the OSI model 00:07:00
    LD11 L18-The 3 Upper Layers of the OSI 00:08:00
    LD11 L19-The 4 Lower Layers of the OSI 00:07:00
    LD11 L20-The process of Encapsulation 00:03:00
    Section 5: Binary to Hex and Decimal conversion
    LD11 L21-The tables we use when converting 00:05:00
    LD11 L22-Converting a Hex number to binary/decimal 00:11:00
    LD11 L23-Converting a Decimal to binary/hex 00:07:00
    LD11 L24-Why do we need to know Hexadecimal numbers? 00:03:00
    Section 6: Cisco three Layer Model
    LD11 L25-Core layer 00:05:00
    LD11 L26-Distribution layer 00:04:00
    LD11 L27-Access layer 00:06:00
    Section 7: TCP/IP model
    LD11 L28-A brief history of the model 00:04:00
    LD11 L29-The layers of the model & how they map over to the OSI 00:05:00
    Section 8: Ethernet Networks
    LD11 L30-Definition of Ethernet Networks 00:07:00
    LD11 L31-The access method of ethernet (CSMA/CD) 00:11:00
    LD11 L32-What cabling standards do we use 00:12:00
    Section 9: IPV4 addresses
    LD11 L33-What is an IPv4 address & Its format 00:10:00
    LD11 L34-Classes of Addresses and their ranges 00:16:00
    Section 10: Private IP address range
    LD11 L35-Definition of Private addressing 00:05:00
    LD11 L36-Private Class A, B, C Address Range 00:15:00
    Section 11: IPv6 Addressing
    LD11 L37-Why do we need IPv6 00:06:00
    LD11 L38-IPv6 addressing and Expressions 00:13:00
    LD11 L39-IPv6 address types 00:10:00
    LD11 L40-The Auto-configuration feature 00:11:00
    LD11 L41-ICMPv6 00:06:00
    Section 12: Transition Mechanisms
    LD11 L42-Dual Stack, 6to4 tunneling and NATPT 00:14:00
    Section 13: How to subnet in IPv4
    LD11 L43-The Subnet mask 00:18:00
    LD11 L44-Diagram used to subnet & Using the diagram…PLEASE NOTE: 2046 should be 2048 00:18:00
    LD11 L45-Class-full subnetting 00:10:00
    LD11 L46-Class-less subnetting 00:21:00
    LD11 L47-Route summarization 00:24:00
    LD11 L48-Wildcard masking 00:12:00
    Section 14: How to subnet in IPv6
    LD11 L49-Do we need to subnet In IPv6? 00:04:00
    LD11 L50-How to setup the diagram for subnetting. 00:05:00
    LD11 L51-Counting for subnets and finding increment value 00:05:00
    LD11 L52-Laying out the subnets with the new network prefix 00:05:00
    Section 15: Inside a Cisco router
    LD11 L53-How to connect to a router 00:09:00
    LD11 L54-Components we need to know about 00:17:00
    LD11 L55-Boot Sequence of a Cisco router 00:10:00
    LD11 L56-Navigation of the IOS 00:13:00
    Section 16: Administrative configurations
    LD11 L57-House Keeping configurations 00:31:00
    LD11 L58-Interface configurations 00:17:00
    LD11 L59-Telnet and SSH into routers 00:06:00
    LD11 L60-Show commands 00:08:00
    Section 17: DHCP and Name resolution on Cisco routers
    LD11 L61-Configuring DHCP 00:15:00
    LD11 L62-Configuring DHCP Relay Agent 00:20:00
    LD11 L63-Configuring static host tables 00:10:00
    Section 18: Using the Cisco Discovery Protocol
    LD11 L64-Using the CDP command 00:10:00
    Section 19: The Cisco register
    LD11 L65-Manipulating the register within the router 00:11:00
    LD11 L66-Accessing & manipulating the register within ROMMON 00:12:00
    Section 20: Routing Process
    LD11 L67-How does IP routing occur 00:14:00
    LD11 L68- What type of routing should I use? 00:10:00
    LD11 L69-What are default routes & where do you configure them? 00:17:00
    LD11 L70-Configuring static routes 00:11:00
    Section 21: Dynamic Routing
    LD11 L71-An overview of the three Dynamic routing protocols 00:20:00
    LD11 L72-RIPv2 & RIPng configurations 00:50:00
    LD11 L73-EIGRP & EIGRPv6 configurations 00:49:00
    Section 22: OSPF Details
    LD11 L75-OSPF Terminology 00:21:00
    LD11 L76-Point-to-Point ospf 00:30:00
    LD11 L77-Multi-access ospf 00:49:00
    LD11 L78-OSPF multiple area details 00:23:00
    Section 23: Switching at Layer 2
    LD11 L79-Purpose of Using Switches & Specific functions at Layer2 00:18:00
    LD11 L80-Navigation on a switch and show commands 00:14:00
    LD11 L81-Administration configurations 00:09:00
    Section 24: The basics of VLANs
    LD11 L82-What are vlans and the importance of using vlans in our network? 00:11:00
    LD11 L83-How to create and assign a vlan /Trunking appropriate ports 00:16:00
    Section 25: The Spanning-tree Protocol
    LD11 L84-What is STP used for 00:06:00
    LD11 L85-How does the STP election process work 00:22:00
    LD11 L86-How to manipulate the election process 00:09:00
    LD11 L87-Turning STP off and Guarding against BPDUs on ports not using STP 00:11:00
    Section 26: The Virtual Trunking Protocol
    LD11 L88-What is the purpose of this protocol 00:13:00
    LD11 L89-Commands and Configurations of the VTP protocol 00:15:00
    LD11 L90-Turning on and adjusting port-security on your switch 00:07:00
    Section 27: Inter-vlan routing
    LD11 L91-What is the purpose of intervlan routing 00:12:00
    LD11 L92-How to configure intervlan routing Part 1 00:34:00
    LD11 L93-How to configure intervlan routing Part 2 00:23:00
    Section 28: Secure your Enterprise using ACL's
    LD11 L94-What is an ACL’s and its rules 00:13:00
    LD11 L95-Standard ACL’s 00:21:00
    LD11 L96-Extended ACL’s 00:26:00
    Section 29: Network Address Translations
    LD11 L97-3 Types of NAT 00:08:00
    LD11 L98-How does NAT work 00:07:00
    LD11 L99-Configure NAT Overload and Dynamic 00:08:00
    LD11 L100-Actual Configuration of NAT Overload 00:08:00
    LD11 L101-Pitfalls to look for on your test 00:06:00
    Section 30: Wide Area Networks
    LD11 L102-What exactly is a WAN 00:07:00
    LD11 L103-What are the connection types 00:11:00
    Section 31: Frame-Relay Packet switched techonology
    LD11 L104-Understanding the CIR and Burst Rate 00:13:00
    LD11 L105-What is a DLCI and who assigns it 00:10:00
    LD11 L106-Configuring Frame-relay 00:25:00
    LD11 L107-Show commands for frame-relay 00:09:00
    Section 32: PPP Dedicated leased connection type
    LD11 L108-Open Standard WAN protocol 00:08:00
    LD11 L109-Configuring PPP and Verifying PPP 00:16:00
    Section 33: IP services
    LD11 L110-Redundancy protocols overview 00:13:00
    LD11 L111-HSRP Details and configuration 00:44:00
    LD11 L112-VRRP and GLBP 00:10:00
    Section 34: Managing Devices
    LD11 L113-SNMP and its Configuration 00:22:00
    LD11 L114-SYSLOG and its Configuration 00:12:00
    LD11 L115-Netflow and its configuration 00:09:00
    Section 35: Summary of the Course
    LD11 L116-Course Summary 00:07:00
    Section 36: New Section Explaining EtherChannel
    LD11 L117-Introduction to EtherChannel 00:01:00
    LD11 L118-What is EtherChannel 00:04:00
    LD11 L119-EtherChannel Lab 00:13:00
    LD11 L120-Summary of Section 00:03:00

    Course Reviews


    • 5 stars0
    • 4 stars0
    • 3 stars0
    • 2 stars0
    • 1 stars0

    No Reviews found for this course.

    • $40.00
    • 180 Days

    Course news